SLA 3D Printing For Teeth Mold

Shenzhen JR Technology Co., Ltd. is one of the leading manufacturers and suppliers of sla 3d printing for teeth mold in China, featured by quality products and good price. If you're going to buy advanced sla 3d printing for teeth mold made in China, welcome to get quotation from our factory. Customized orders are welcome.

SLA 3D Printing For Teeth Mold is mainly responsible for the batch customization of dental models at different stages of orthodontic treatment. After the tooth model is made, the transparent diaphragm is wrapped on the model by the thermoplastic molding process, so as to make invisible braces suitable for the patient.

The process

1. The doctor takes pictures of the patient's teeth, takes CT films, and obtains the initial model of the teeth through the occlusion. According to the model, the computer 3D data is obtained by scanning, and a specific orthodontic plan is obtained through specific orthodontic software.

2. According to the 3D data obtained from different types of orthodontic solutions, use SLA 3D printers to make dental molds, and then produce corresponding invisible braces based on the 3D printing teeth molds, and a complete set of personalized orthodontic solutions corresponding to patients is implemented.

The benefits of SLA 3D Printing For Teeth Mold

Usually, a patient needs to replace about 30-40 pairs of invisible braces, and the effect of correction is achieved through the continuous light force on the teeth. 30-40 pairs of invisible braces mean 30-40 models of orthodontic teeth need to be printed, with only very small differences between each model. If traditional processing methods are used, it is simply impossible to tailor and mass-produce correction models for patients in a short period of time. SLA 3D printing technology just meets the two conditions of personalization and mass production. The core technology of the SLA 3D printer has the characteristics of high precision, fast printing speed, and good surface finish, making it the industry that can truly meet the production needs of the dental industry.

The application

Helping the dental industry to complete the transformation from digital production to intelligent production and has deeply penetrated into multiple application scenarios such as dental implants, invisible orthodontics, and surgical guides.

In view of the unique characteristics of each patient, the personalized customization needs of dental medicine are perfectly matched with the technical characteristics of 3D printing.

Dental industry to complete the transition from digital production to intelligent production. The use of 3D printing technology to make crowns, bridges, dentures, etc. is also emerging in the field of dentistry

The SLA 3D printer owned by JR has a layer thickness accuracy of 0.1 mm, intelligent variable laser power printing technology, and ultra-high printing efficiency, which can fully meet the printing requirements of dental models. The high temperature-resistant photosensitive resin material ensures that the 3D Printing For Teeth Mold will not be deformed during the production of invisible braces, with relatively low cost and high strength. Feel free to contact us any time

Website: www.china-3dprinting.com | E-mail:Sales@china-3dprinting.com

Hot Tags: sla 3d printing for teeth mold, China, suppliers, manufacturers, factory, customized, price, quotation, ABS Stereolithography, 3D printed car bumper, front and rear bumpers of car, 3D printed headlights, 3d printed car modification, 3D Printing eyewear