1. Aerospace: The best performance and the capacity to adapt to extreme environments
The aircraft sector has very demanding standards for metal 3D printed parts. In short, these parts must be strong, able to handle high temperatures, reliable, and light. For example, aircraft engine turbine blades have to perform at temperatures over 1000 °C and sustain centrifugal forces of tens of thousands of revolutions per minute. They also have to be 30% to 50% lighter than standard castings. This very difficult working environment makes three main demands on post-processing:
Microstructure control: Using hot isostatic pressing (HIP) to get rid of internal pores and get the material density near to 100%. A certain aircraft company employs HIP-treated 3D printed titanium alloy blades. These blades last five times longer than untreated parts and are 92% as strong as forged parts.
Getting rid of residual stress: The residual stress from the laser selective melting (SLM) process can be as high as 60% of the material's yield strength. Stress annealing (holding at 550 °C for 4 hours) is needed to bring the stress level down to a safe level. After this treatment, the load-bearing structure of a given spaceship was able to change shape from 3.2mm to within 0.1mm.
Control of surface integrity: Electrolytic polishing lowers the surface roughness from Ra12.5 μm to Ra0.4 μm and makes a passivation layer that is 1–2 μm thick. This makes the salt spray test last from 200 hours to 2000 hours and makes the product safe for use in marine environments.
2, Medical implants: biocompatibility and individualised customisation
The medical business needs metal 3D printed parts that are safe for living things and can be used in many different ways. The main problem is to make sure that "material structure function" matches three times. For example, customised hip joint prosthesis need to meet the following parameters for post-processing:
Surface biological activation: A 20 μm thick porous oxide layer is generated on the surface of titanium alloy using micro arc oxidation. The porosity is kept between 30% and 40%, and the pore size is between 50 and 100 μm, which is similar to the structure of human bone trabeculae. A clinical investigation demonstrated that this surface treatment can enhance the pace of bone integration by 40%, achieving a prosthesis stability rate of 98.7% six months post-surgery.
Treatment that doesn't use magnets: For nuclear magnetic resonance to work, the material's residual magnetism must be less than 5nT, and the difference in magnetic domain orientation that happens during printing must be removed through solid solution treatment (850 °C insulation for 2 hours and water quenching). After this therapy, the region of picture artefacts caused by a specific cardiac stent in a 3T MRI machine shrank by 82%.
Size control that is unique to you: A five-axis linkage machining centre grinds the joint surface to a size precision of ± 0.02 mm. Using reverse engineering to scan patient CT data, 3D printing, and CNC precision machining, a custom skull repair implant fit 99.3% of the defect site.
3. Making cars: balancing weight and cost
In the automotive sector, there is a "polarised" need for metal 3D printed parts. High-end models want the best performance, while low-cost models want to keep costs down. This unique requirement is pushing post-processing technology to change in two ways:
High-performance component processing: The motor casing of a new energy vehicle is built of 3D printed aluminium alloy. T6 thermal treatment (solid solution 530 °C + artificial ageing 170 °C) raises the tensile strength from 280 MPa to 380 MPa. The thermal conductivity is also improved from 120W/(m · K) to 180W/(m · K) to fulfil the needs of IGBT modules for heat dissipation.
Processing of economic components: A specific economic model employs 3D printed stainless steel brackets, with surface roughness diminished from Ra10 μm to Ra3.2 μm via sandblasting treatment using Al2O3 sand particles of 80 mesh size. Simultaneously, a compressive stress layer 0.5 μm thick is created, which extends the fatigue life from 50,000 to 200,000 cycles, meeting the 10-year usage criteria.
Optimising batch production: A multi-laser head SLM device prints a specific transmission valve body, and an online laser interferometer checks the quality of the interlayer bonding in real time. With the help of automated shot peening treatment (glass beads, particle size 220 mesh), the post-processing time for one piece is cut from 45 minutes to 12 minutes, which is enough time to make 500,000 pieces a year.
4. Energy equipment: guaranteed long life and resistance to corrosion
Metal 3D printed parts need to be able to handle very harsh conditions, like high temperatures, high pressures, and significant corrosion. This is true in the sectors of nuclear power, petrochemicals, and others. A specific subsea oil and gas valve is built of a nickel-based alloy that was 3D printed. Its post-processing system includes:
Cleaning using supercritical fluids: Using liquid CO2 to clear away leftover powder in the internal flow channel, this method is eight times more effective than typical ultrasonic cleaning, and the size of the leftover particles is kept below 10 μm.
Gradient heat treatment: By segmented quenching (1050 ℃ water quenching + 760 ℃ oil quenching), a 1mm thick martensitic layer is formed on the surface of the material, while the austenite structure is kept in the core. This makes the valve's impact toughness go from 20J to 120J at -46 ℃ low temperature conditions.
Composite coating technology: First, plasma spraying creates a 0.3mm thick Al2O3-13% TiO2 ceramic layer. Then, laser cladding adds a 0.1mm thick NiCrBSi alloy layer. This lowers the valve's corrosion rate from 0.02mm/year to 0.001mm/year in a 5% NaCl solution.
Do different fields have the same needs for finishing metal 3D prints?
Feb 16, 2026
Send Inquiry