How can metal printing technology be used to produce precision liquid nozzles?

Aug 28, 2025

一, The problems with making typical nozzles and the new possibilities that metal printing opens up
1. The problems with traditional workmanship
Precision liquid nozzles have a core structure that incorporates micrometer-level flow channels, nozzle arrays, and multi-layer functional components. To make them, the following strict standards must be met:
High precision: The nozzle opening should be between 10 and 50 microns, and the flow channel's surface roughness Ra should be less than 0.8 μm.
The structure is complicated since it needs to have liquid supply ports, fake holes, and regions where injection ports can be formed. Traditional CNC machining needs a lot of different processes, which makes it expensive and gives low yield rates.
Material properties: Materials that are resistant to corrosion, have good thermal conductivity, or are biocompatible (such stainless steel, titanium alloys, or nickel-based alloys) are needed because traditional casting or welding can readily cause problems.
For example, making liquid jet heads the old-fashioned way involves making liquid path layers with photolithography and then stacking jet ports to make parts. But the uneven flow of light resistance at the border of the liquid supply port might make the surface not flat enough, which in turn affects the consistency of the nozzle height and makes the jet work less well.
2. The main benefits of metal 3D printing
Metal printing technology builds three-dimensional objects directly by melting or spraying metal materials on top of each other, which goes beyond the physical limits of existing methods.
Freedom to design: It may make any complicated flow channel, gradient material, or integrated design, like combining the liquid supply port, fake hole, and spray port into one.
LPBF technology may achieve a dimensional accuracy of ± 0.05mm. When paired with post-processing processes like chemical polishing and micro grinding, it can also achieve a surface roughness of Ra ≤ 0.4 μ m.
Rate of use of materials: Inkjet metal 3D printing uses on-demand spraying, which means that it uses more than 90% of the material, which is far more than the 50% to 70% that typical powder bed melting uses.
Quick iteration: The design-to-sample manufacturing cycle is cut down to only a few days, which makes it possible to make small batches and customise products for each customer.
二, Important uses of metal printing technology in making nozzles
1. Nozzle for a microfluidic chip
Microfluidic chips need to have flow channels, valves, and reaction chambers that are only a few micrometres wide. Traditional soft lithography methods make it hard to make metal parts with very high precision. Metal LPBF technique can print stainless steel or titanium alloy substrates, use chemical etching to make microchannels, and then use inkjet metal 3D printing to add functional coatings like hydrophobic layers. This makes the materials very resistant to corrosion and safe for living things. For instance, a company produced a medical diagnostic chip nozzle that utilises LPBF to print a 316L stainless steel base. Then, it sprays gold nanoparticles onto the base to make a conductive electrode, which makes it three times more sensitive than older methods.
2. Inkjet printing heads for businesses
Integrating thousands of micrometer-sized nozzles into high-precision inkjet printing heads is expensive and has a low yield when done using standard methods like polysilicon etching and bonding. Inkjet metal 3D printing technology can do the following:
Multi-material integration: spraying stainless steel (for structural support) and piezoelectric ceramics (for driving components) at the same time to make a gradient functional material nozzle;
Improving the nozzle array: By optimising the structure, asymmetric flow channels are made to lower ink droplet splashing and raise printing resolution to 2400dpi.
Fast customisation: To speed up the development cycle, change the nozzle aperture and channel angle based on the ink's properties, like viscosity and surface tension.
3. Nozzle for 3D printing
Metal 3D printing nozzles have to be able to handle high temperatures (>2000 °C) and high pressures (>100MPa). Traditional techniques of putting them together, like brazing or electron beam welding, can easily cause thermal stress cracks. DED technology, like coaxial powder feeding laser cladding, can do the following:
Integrated moulding: Place nickel-based alloy nozzles directly on the substrate to eliminate welding problems;
Functional gradient design: The nozzle output is constructed of copper alloy with strong thermal conductivity, and the internal flow channel is composed of titanium alloy with high strength. This balances thermal management and structural strength.
Repair and Remanufacturing: Worn nozzles are treated using localised laser cladding, which makes them last more than three times as long.
三, Problems and solutions in technology
1. Control of surface roughness
The roughness of the surface of metal printed objects is usually Ra ≥ 6.3 μm, which needs to be improved through post-processing:
Chemical polishing, which uses acid washing to get rid of bumps on the surface, can lower Ra to less than 3.2 μm. Laser micro cladding, on the other hand, generates a thick oxide layer on the surface while making it less rough.
Hybrid manufacturing: Using both 3D printing and CNC precision machining to get a critical surface Ra of less than 0.8 μm. 2. Finding defects inside
There are problems with the powder bed melting process, such pores and cracks, therefore it needs to be tested without destroying it to make sure it works.
Industrial CT scan: find any interior holes to make sure the density is at least 99.5%;
Test for fatigue: To make sure that the service life fulfils the specification, do 10 cycles of loading according to the ASTM E466 standard.
2. Compatibility with more than one material
Inkjet metal 3D printing needs to deal with the fact that different metals have varying melting points and problems with bonding at the interface:
Nanoparticle ink: Make an ink with a low melting point alloy, like Bi-based alloy with a melting point of about 60 °C, to print at low temperatures.
Laser remelting or ultrasonic welding can make the link between different materials stronger.

Send Inquiry