Situation in the market: price differential in the context of supply and demand
There is currently a "shortage of high-end materials and surplus of ordinary materials" in the market for metal powder used in molds. For instance, in the realm of 3D printing molds, high-performance materials like nickel-based alloys and martensitic stainless steel have long been scarce because of lengthy production cycles and high technical barriers; in contrast, common powders like iron- and copper-based powders are subject to intense price competition because of overcapacity.
From the standpoint of regional markets, the concentration of mold businesses and manufacturers of 3D printing equipment has made the Yangtze River Delta and Pearl River Delta the primary locations for the consumption of metal powder. According to data, East China accounted for 45% of the country's total metal powder procurement volume in the first half of 2025. The demand for martensitic stainless steel powder increased by 32% annually, which caused regional prices to rise by 8% to 10% above the national average.
Two elements that affect prices: a review of the whole supply chain, from raw materials to processes
Numerous factors affect the cost of metal powder for molds, but the following five dimensions can be used to deconstruct its basic logic:
1. Costs of raw materials: Transmission of price changes for base metals
Base metals including iron, nickel, chromium, cobalt, and others are the primary ingredients of metal powder, and the price of these metals on the global market has a direct impact on the powder's pricing. For instance, there is a strong correlation between the price of LME nickel and the price of electrolytic nickel powder. The price of nickel-based alloy powder rose in tandem with the average price of electrolytic nickel powder in September 2025, which was 151 yuan/kg, a 6% increase from the start of the year. Furthermore, adding rare metals like scandium (Sc) can greatly enhance the material's qualities, but doing so will raise the powder's unit cost to 3000–4000 yuan/kg, which is the primary cause of the high cost of premium powders.
2. The technical route establishes the maximum cost for the flour milling operation.
Another important element influencing costs is the milling procedure. Atomization, plasma rotating electrode (PREP), and electrode induced melting gas atomization (EIGA) are the mainstay techniques used today. Because of its minimal equipment investment and excellent production efficiency, the atomization method has a market share of over 60% among them. However, because of its poor powder sphericity and need for extra screening treatment, it produces a fine powder yield of less than 10%, which indirectly raises costs. On the other hand, only a small number of top businesses use the PREP process, despite the fact that it can create high sphericity powders with D50<20 μ m. The equipment unit cost approaches 20 million yuan. The product costs between 30% and 50% more than gas-atomized powders.
3. Granularity and purity: Price differentiation is driven by performance demand.
The mold's performance is directly impacted by the powder's particle size and chemical purity. Using martensitic stainless steel powder as an example, the cost of the fine powder (15-45 μ m) used for selective laser melting (SLM) rises to 280 yuan/kg because multi-stage airflow classification is required, while the coarse powder (45-106 μ m) used for laser cladding costs roughly 180 yuan/kg. The addition of 0.6% to 0.8% scandium element is required if the material is to meet the high-temperature strength standards in the aerospace industry, and the cost of the powder would approach 4000 yuan/kg.
4. Quality certification and inspection: Compliance expenses make up a sizeable amount of
The metal powder used to make molds must meet international standards like ASTM F3001 and ISO 9001. Additionally, some military-grade materials must pass over ten tests, including ones that measure their microstructure and mechanical qualities. 10% to 15% of the sale price is spent on third-party verification. For instance, because of its NADCAP aerospace certification, a certain manufacturer's 18Ni300 mold steel powder costs 25% more than uncertified goods.
5. Logistics and packaging: Unexpected expenses cannot be disregarded
Metal powders must be packaged in nitrogen-filled or vacuum-filled inert gas and kept in moisture-proof, anti-static containers. Single barrel packaging costs between fifty and two hundred yuan more. Cross-border procurement expenses are further increased by the fact that air transportation is three to five times more expensive than land transit due to IATA dangerous goods standards.
3 Typical material price range: including the whole range from low-cost to expensive
The following are the costs of common metal powders for molds, based on market data as of September 2025:
Type of material, common brand, use case, and cost range (yuan/kg)
Powder made of iron 6.5% Fe 45–80 Si automotive mold die-casting powder with a copper base CuSn10 nickel-based alloy powder electronic connector mold 120-180 800-1200 Ni625 aerospace mold powder for martensitic stainless steel Conformal cooling water channel 260-350, 17-4PH injection mold
Powdered mold steel Die-casting mold 180-240, H13 hot work mold, powdered cobalt chromium alloy Medical mold made of CoCrMo, customized implant 1500–2000
What is the price of metal powder materials for molds?
Dec 26, 2025
Send Inquiry