How can metal 3D printing achieve high-precision molding of molds?

Jan 23, 2026

一, Technical principle: from micro melt pool to macro accuracy, precise control
The main idea behind metal 3D printing is to melt metal powder layer by layer using high-energy heat sources. This makes it possible to go straight from digital models to real parts. For example, the process flow for laser selective melting (SLM) technology has four main steps:
Powder spreading: A bidirectional scraper mechanism spreads the metal powder equally across the workbench. The thickness of the coating can be regulated very precisely, between 5 and 50 μm, which provides the basis for micrometer-level accuracy.
Laser scanning: An f-theta lens focuses the high-energy beam from a 200W fiber laser to create a spot that is less than 100 μ m in diameter. The powder is melted along a predefined path at a speed of 3000mm/s, and the width of the molten pool is around two to three times the diameter of the spot.
Layer by layer stacking: After each layer is melted, the workbench goes down by the height of one layer, and the powder laying melting process is repeated until three-dimensional solid formation is achieved by layer by layer stacking.
Control the atmosphere: Keep the molding chamber filled with an inert gas that has less than 0.1% oxygen. This will stop metal from oxidizing and keep the material's performance stable.
This method of melting layer by layer makes it possible to create intricate shapes inside the mold that are hard to work with using traditional methods. For instance, the Platinum BLT-S400 equipment can control the minimum feature size to within 100 μ m and the original surface roughness Ra to within 8 μ m for a molding size of 400 × 300 × 400mm ³ through multi-laser collaborative scanning. This gives hardware support for making molds with very high accuracy.
二, Four main ways to improve accuracy using technology
1. A flexible cooling channel that goes from evenly spreading heat to exact temperature control
The typical mold cooling system uses straight holes or drilling technologies, and the arrangement of the cooling water circuit is limited. This can easily cause the mold to have uneven temperature distribution, which can lead to problems such product deformation and shrinkage. Metal 3D printing technology has broken past this barrier. With topology optimization design, a conformal cooling channel that fits the shape of the mold cavity perfectly can be made inside the mold.
Platinum Technology uses BLT-18Ni300 mold steel and 3D printing to make the cooling water channel 2-3mm in diameter and the water channel spacing 5-8mm. This lets the cooling liquid directly affect high-temperature areas. Experimental data indicates that the improved cooling system may decrease the mold's surface temperature difference from 15-20 ℃ in conventional procedures to below 5 ℃, reduce the injection molding cycle by 15% -30%, and enhance product yield by over 10%.
2. Lightweight structure: from taking away material to making the structure better
When making molds the old-fashioned way, superfluous materials are removed by mechanical processing. This costs resources and makes it hard to create intricate internal structures. Using topology optimization methods, metal 3D printing may accurately remove elements that aren't needed while keeping the mold strong, which leads to a lightweight design.
For instance, after using 3D printing technology to make a mold for a car part, the weight was cut by 35% and the cost of the materials was cut by 28%. At the same time, a lightweight design makes the mold less heavy, cuts the time it takes to change the mold by 40%, and greatly increases production efficiency. By filling the non-load-bearing sections with lattice structures, weight can be further reduced without losing stiffness. This is a new way to make molds lighter.
3. Complex Function Integration: From One Structure to Many Functions
Metal 3D printing has layered manufacturing features that make it possible to combine several functional structures into molds. For instance, in injection molds, the ejector mechanism, slider, cooling water circuit, and other parts can be combined into one part to make assembly easier and less likely to go wrong. In a medical mold scenario, 3D printing made the mold that used to need 12 parts to be put together into just 2 parts. This cut the time it took to put the mold together from 8 hours to 1.5 hours and kept the dimensional tolerance within ± 0.02mm.
4. Innovation in Materials: From Universal Alloys to Custom Materials
Metal 3D printing can work with a wide range of materials, including stainless steel, aluminum alloys, titanium alloys, and nickel-based alloys. It can also change the properties of materials by changing the composition of the powder. For instance, in the aerospace industry, molds made with Inconel 718, a nickel-based alloy, can stay strong and resist corrosion even at temperatures as high as 650 °C, which is what is needed for very tough working conditions. In the medical field, managing the porosity (30–70% changeable) and pore size (200–600 μ m) of titanium alloys can help implants and human bones work better together, which can make surgery more successful.
三, Technology for post-processing: from rough molding to perfect accuracy
Even though the original forming precision of metal 3D printing is at the micrometer level, post-processing technology still needs to be added to meet tight standards for mold surface quality, dimensional accuracy, and other things.
Heat treatment is a procedure that gets rid of residual stress and improves the microstructure of materials. Some examples are solution annealing and age treatment. For instance, the hardness of H13 tool steel can go from 38HRC to 52HRC following solution treatment at 1050 °C and aging treatment at 620 °C. Its wear resistance also gets a lot better.
Surface treatment: To make the surface better, sandblasting, polishing, electroplating, and other methods are utilized. Through mechanical polishing, the surface roughness of a certain precision mold case was decreased from Ra8 μ m to Ra0.4 μ m. This met the injection molding standards for optical grade products.
Precision machining: CNC milling or EDM machining of important items with strict size tolerances. For instance, a certain connector mold is made using both 3D printing and CNC composite manufacturing, and the mating clearance is kept to within 0.005mm, which is the highest level in the world.

Send Inquiry