The change from "subtractive" to "additive" in additive manufacturing
Most of the time, traditional manufacturing methods are subtractive manufacturing, which cuts, drills, mills, and other methods to get rid of extra components from raw materials to get the shape of the product you want. For example, when making a complicated energy equipment part, mechanical processing may require cutting a large metal blank multiple times. Only a small part of the material becomes the part, while most of it is thrown away as waste. Statistics show that in some typical mechanical procedures, only 20% to 30% of the raw materials are used.
Metal 3D printing uses additive manufacturing, which builds items by building layers of metal powders or wires on top of each other based on computer-aided design (CAD) models. This kind of manufacturing doesn't need taking away materials; instead, it adds materials to the right places based on the shape and structure of the parts. For instance, when making a part for energy equipment with a complicated internal structure, a metal 3D printer can stack metal powder at certain points according to design specifications to create the necessary channels and support structures. This saves material that would have been wasted by traditional processing methods. Metal 3D printing has a big advantage in using raw materials since it has changed from "subtractive" to "additive." It usually uses over 90% of the material, which cuts down on waste.
Integrated production of complicated structures: cutting down on waste from assembly
Many sections of energy equipment need to have complicated internal structures and functions. Traditional manufacturing methods typically have trouble making these complicated parts all at once, so they have to be put together from several smaller parts. During the assembly process, not only do you need extra connectors and other resources, but certain parts may also need to be thrown away since they weren't put together correctly. For instance, when making parts for a nuclear power plant's cooling system, old methods would entail making several pipes, joints, and valves separately and then putting them together. There could be problems like loose connections and bad sealing throughout the assembly process. This could mean that some parts need to be remade or replaced, which is wasteful.
Metal 3D printing can make complicated constructions by combining several parts into one piece. CAD models let designers make complicated structures that include all of the internal channels and functional parts. Then, they can make them all at once with a 3D printer. This not only cuts down on the need for assembly processes and connectors, but it also stops waste that comes from problems with assembly. For example, metal 3D printing may make an integrated gearbox housing for a wind turbine with complicated gear configurations and internal lubrication channels. This cuts down on the waste and connector expenses that come from putting together many parts in traditional production.
Near net forming: cutting down on waste from later processing
Parts made using traditional manufacturing methods frequently need a lot of extra work, including grinding, polishing, drilling, and so on, to meet the final standards for dimensional accuracy and surface quality. More garbage will be made during this process. For instance, when making a big casting for energy equipment, the surface of the casting often has roughness and porosity, which means that a lot of cleaning and finishing is needed, which makes a lot of metal shavings and waste.
Metal 3D printing technique has the "near net shape" feature, which means that the components made with it have very high dimensional precision and surface quality, which is very close to what the end product needs. This makes the work of processing them later much easier. Metal 3D printing can manage the size accuracy of objects within a small range and get a very rough surface by fine-tuning the printing settings and procedures. For instance, when making high-precision sensor housings for energy equipment, metal 3D printing can make housings with smooth surfaces and exact dimensions right away, without the need for a lot of further processing. This cuts down on the amount of waste that is created during processing.
Recycling and reusing materials lowers the expense of getting rid of trash.
There is some trash made during the metal 3D printing process, but it is not too hard to recycle and use again. Metal 3D printing waste is easier to recycle and treat than waste from typical manufacturing techniques because it has a simpler makeup, lower levels of impurities, and is less challenging to recycle. For instance, the waste from metal 3D printing that is made up of unmelted powder and support structures can be recycled and used again for 3D printing through processes including cleaning, screening, and remelting.
Some companies that do advanced metal 3D printing have also set up a full recycling system that sorts, processes, and reuses the trash to recycle materials. This not only lowers the expense of getting rid of waste, but it also lowers the need for fresh raw materials, which makes making energy equipment even less harmful to the environment.
Make things to order to cut down on wasted inventory.
Most of the time, traditional energy equipment manufacture uses a large-scale production method. Businesses need to make a lot of standardized products and keep the right amount of inventory on hand to meet market demand. But the demand for products on the market is always changing, and some of them may end up sitting in inventory for a long time because demand has dropped, which means they will eventually become trash.
Metal 3D printing technology makes it possible to make things that are just right for each consumer. This means that companies can swiftly make energy equipment products that meet each customer's wants. This way of making things on demand lowers the chance of having too much inventory and avoids waste from unsold goods. For instance, some modest energy projects or unique application situations need customers to have customized needs for the performance and specifications of energy equipment. Metal 3D printing can be changed to fit these needs for production, so there is no need to make a lot of conventional products, which lowers the chance of waste.
https://www.china-3dprinting.com/metal-3d-printing/3d-printing-high-performance-heatsink.html